Products Application Science Company overview Contact us
[ CAR-AUDIO ] [ UPS ] [ Engine starting devices ] [ Batteries

CAR-AUDIO      [ Products ]
Capacitors for car-audio systems

ELIT Audio Caps - New Sound

History background.

Over the past twenty years output power of car-audio systems has increased from tens to thousands of watts. There is an obvious tendency of growing application of low frequency sound during developing audio programs with the unchangeable on-board voltage - 12 V.

Lead-Acid batteries applied in car building have rather high energy storage, but electrochemical reactions which take place on the electrodes with the limited speed cause slow reaction to powerful short-termed loads emerging during amplifier's operation. Their internal resistance does not let apply resulting discharge currents. During amplifier operating with a standard battery, on-board voltage drops immediately, that influences quality of audio program reproduction: distortion of low frequencies, non-stable volume of reproduction.

Traditionally this problem was solved by means of additional installation of aluminum capacitors units in power circuit of car-audio amplifier system.

Nowadays these capacitors cannot guarantee high quality operation of modern and powerful amplifiers (for instance of 1000W) with normal physical dimensions and technical performances.

Electrochemical capacitors with double electric layer, so called "Supercapacitors" with higher specific characteristics than usual Aluminium capacitors have, have already occupied a significant share on car-audio systems market in a number of countries.

Advantages of ELIT capacitors.

It's commonly known the longer is the pulse (quantity of overtones), the brighter is the beauty of deep timbre of low frequency. For frequencies lower than 50 Hz it's always desirable to prolong the sound till and more than 100 milliseconds at the saving of the fixed hearing power. Comparative testing of Supercapacitors and aluminium capacitors, carried out by famous in the field of CAR-AUDIO application companies, showed evident advantages of ELIT Supercapacitors. Even if the amplifier power rated up to 1000 W, with the traditionally used aluminium capacitors, Supercapacitors show higher voltage at the end of 100th millisecond of discharge, and therefore, higher power:

1000 W :

Capacitor type and capacity
1F, aluminium
15F, Supercapacitor
30F, Supercapacitor
Capacitor Voltage at the end of 100th millisecond
11,6V
11,84V
11,9V

Considering more powerful systems, being the most popular nowadays, the old principle: 1F per 1000W is not effective. 2F Aluminium capacitor is unable to support the sound quality in 2000 W audio systems, as seen from the table below.

2000 W :

Capacitor type and capacity
2F, aluminium
15F, Supercapacitor
30F, Supercapacitor
Capacitor Voltage at the end of 100th millisecond
"0"V
10,98V
11,14V

At the same time, the Supercapacitor operating jointly with 2000W amplifier provides power for prolonged low frequency pulse, therefore, timbre quality.

The latest testing also showed the efficiency of Supercapacitor use to support the quality of medium and high frequencies. In this case, the power at these frequencies is supported by Supercapacitor in millifarad range.

ELIT capacitors for CAR- AUDIO

ELIT Co is one of the largest producers of Supercapacitors. ELIT Supercapacitors (5F, 15F and 50F) have been sold for already 4 years through, by American companies: Alumapro, Phoenix Gold under "The C.A.P.'' brand - worldwide known in the sphere of CAR- AUDIO.

Supercapacitor ELIT proposes a number of new upgrades, providing higher sound quality, performances and service features. ELIT capacitor together with a battery provides better operation mode and softens pulse energy peaks. As a result, on-board voltage is stabilized, reproduction distortions are eliminated.

On CAR-AUDIO market ELIT Co presents several types of Supercapacitors which provide effective operation of car stereo:

- Capacity of 5 F for systems with 500 W

- Capacity of 15 F for systems with 1000 W

- Capacity of 27 F for systems with 2000 W

- Capacity of 50 F for systems with 8000 W

Operating voltage of car on-board circuit is from 14 to 18 V.

ELIT Co has a number of Russian and International patents.

More advantages of ELIT capacitors.

Flat design of ELIT capacitors provides unique opportunity to mount these devices significantly easy, comparing to the typically used 1 F cans.

Book-shaped ELIT capacitors allow for installation easy and stealthy for distributors and end-users.

ELIT capacitors are designed to carry on our vision of our customers demands with maximum reliability provided by ELIT cutting-edge technology.

ELIT car-audio capacitors require no maintenance during the entire service life.

High quality and reliability of ELIT capacitors, proved by long-lasting operation under ''The C.A.P." brand, provide perfect operation of car-audio system.


 
up
design: